How To Paint A Power Wheels Car With Spray Paint – 8 Ultimate Guide

Peter Simms // Last Updated on September 26, 2023

With money being tight today, possibly the solution to giving your power wheel a new look would be to indulge in a few car spray paintings. Painting might be the best solution if the mechanics are in good shape, but the body isn’t so hot. It is a money saver, but even more so if the process is DIY instead of doing it professionally.

You can do it if you know the basics of how to Paint Power Wheels with Spray Paint? It hardly makes sense to leave the job to a professional who won’t do any better than you can do yourself with spray paint and paint-related products. All you need is a bit of patience, solvent, primer, protective gear etc, to get the job done. The overall process involves just a few easy steps.

If you are among those who want to know the basics of power wheel spray paint, please stay tuned until we reveal the entire process. Read more.

How to Paint a Power Wheels Car with Spray Paint- Restore the Original look

How to Restore Power Wheels Plastic with Spray Paint

Giving your kids best power wheels a new look with paint seems to be the ultimate way to do that. It doesn't matter how clean and shiny your power wheels are. If it has rusted and dirty wheels, then it will still look poor. If you are trying to restore power wheels’ plastic, here are the following steps.

Things You Need: Paint Power Wheel with Spray Paint

There are few materials that you need in order to carry out the task properly:

  • Soapy water
  • Mineral spirits
  • Damp paper towel
  • Masking tape
  • Grit-sandpaper
  • Self-protective gear
  • Primer
  • Spray paint

8 Steps to Follow to Paint Power Wheel with Spray Paint

Step 1: How to Clean Power Wheels with Cleaning Tools

  • Using Soap and Water:
cleaning ride on car using soap and water

First of all, clean your wheels with soap and water. Throughout this method, you can remove most grime and dirt from your wheels. It will allow you to identify any chips, dents, and rust on your wheels. It will make sanding more efficient and easier.

  • Using a Grease and Wax Remover

A grease and wax remover is just a nonpolar solvent like mineral spirits. It can dissolve things that water cannot, like oils. Remove the marks with a damp paper towel and mineral spirits applied directly to the mark or scuff.

Step 2: Sand Your Custom Kids Power Wheels

Sand Your Custom Kids Power Wheels

You will need to take the power wheels’ plastic parts and give them a good sanding with 220 grit plastic sandpaper. Use medium-grade sandpaper and rub the sides of your car in one direction only (not back and forth).

Be sure not to press too hard as the plastic can be scratched easily by hard rubbing. Test this on an inconspicuous area first to ensure it won't be visible after restoration is complete. You may also need to sand down a boat hull and other small pieces like ladders, oars, etc.

Step 3: Dry the Custom Made Power Wheels

Dry the Custom Made Power Wheels

You can use compressed air to get any crevices or cracks that you can’t reach. Ensure that water is removed completely. We absolutely need to clean the kids’ power wheels for priming and painting. You can also use a cloth to dry the wheels and ensure no water on the surface at all.

Step 4: Preparing Your Wheels for Priming

Preparing Your Wheels for Priming

You need to select a place to prime. The best place needs to be as dust-free as possible. It is important to have a good ventilation system that helps to remove dust and other contaminants. It also removes the residual thinner and paints from the room.

Step 5: Wear Protective Gear for Your Self

Wear Protective Gear

You need to wear self-protective gear to protect yourself from toxic components in the paint. It protects your paint job from falling anything off your body.

Step 6: Prime the Toddler Power Wheels

The primer is essential to provide the ideal surface for your painting job. It helps to adhere the paint with the wheel and makes it free from rust. It also allows the paint to look the same across your wheel and provides a smooth color across the paint surface.

Prime the Toddler Power Wheels

After priming, you can inspect any fault that you may have missed when finding the wheel to this mark. You will have to sand down the primer if you can see any blemishes, point out the fault, and prime again. It is the final option to make your wheels perfect before the paint goes on.

Step 7: Painting Your Wheels

Painting Your Wheels

After the priming process, it's time for painting. I like to use oil-based spray paint because of its cost and convenience. I recommend using Rust-Oleum PK Painter. Spray smoothly across the paint surface.

Do not move too slowly or get too close, otherwise you will ruin your paint. On the other hand, you would get good coverage if you move too quickly as well. You can do 2 or 3 coats of this until you are happy with the results. Wait a few minutes between two coats.

Or, if you want to apply a painter that can be applied without sanding and priming, use Krylon Fusion Spray Paint. Wait an hour, and the plastic will be completely prepared for handling.

Step 8: Reassemble

After painting, reassemble the power wheels

You will want to glue your pieces in place with the adhesive or screws after all of your painting is complete. The final product should look crisp & clean, without unsightly seams.

How to Choose the Best Paint for Power Wheels?

Paint is specifically designed to give surfaces a gorgeous appearance. There are many paints available in the market, but not all of them are good for your kid's ride-on toy. Different types of paint are designed to perform different tasks on your plastic surfaces.

It is important that you buy power wheels paint carefully in order not to waste your hard-earned money on a bad product. Therefore, we have picked the two best paints for power wheels paint.

1. Rustoleum Teal Spray Paint for Plastic Toys

It is one of the best power wheel paints that you can use on its exterior or interior surfaces. In addition, it has a variety of colors so that you can choose a specific color according to your kid’s taste.

Smooth Finish:

Its double cover technology will speed up your project along with super quality. In addition, a satin finish reduces imperfections on the surface. Therefore, you will get a smooth finish and a classic look.


Oil-based primer protects your power wheel surfaces for a long time. Therefore, you don’t have to worry about scratches on it anymore.

Drying Time:

It has a fast drying time, which is only 20 minutes. In order to obtain the best result, you need to coat this primer two times a few minutes apart lightly. The product has a very low smell that won’t make you uncomfortable when applying it. Whenever the paint dries, the smell will disappear.

Coverage Area:

With a spray paint can, you can spray paint plastic power wheels up to 12 sq. ft. area. So, you can easily finish your task with a can.

You can also apply this 2X Ultra Cover primer on other surfaces such as metal, plaster, metal, unglazed ceramic, and masonry. As a result, any furniture, crafts, or home décor items will no longer retain their old look.

Highlighted Features and Specification:

  • 2x more coverage with double cover technology
  • Rich and deep color
  • Wider finger pad to reduce fatigue
  • Stain finish with Satin Vintage Teal color
  • Oil based spray paint
  • Item Weight: ‎15.3 ounces
  • Dimensions: 2.63 x 2.63 x 7.88 inches

2. Krylon Spray Paint for Plastic Ride on Toys

Krylon Spray Paint for Plastic Ride on Toys

Krylon Fusion is the perfect primer spray paint for giving your kids the rides they love. It bonds remarkably well with surfaces requiring a pleasing appearance.

Sand and Prime Free:

You don't need to sand or prime the power wheel’s surface before applying Krylon Fusion. With this fusion paint, you can have a smooth and shiny finish.

360-Degree Touch Dial Tip:

The spray tip on this paint is equipped with a 360-degree EZ Touch dial that helps you get the job done a lot faster and easier.

Faster Dry:

Your kid can touch it after 15 minutes and ride it in 1 hour. Additionally, it provides a chip-resistant finish after seven days.

The fusion paint is also great for wood, glass, hard vinyl, ceramic, metal, paper, and more.

We advise you to use one of them to ensure maximum adhesion and long-lasting paint on your power wheels.

Highlighted Features and Specification:

  • Blue Hyacinth color
  • Item Volume: 0.34 Milliliters
  • Size: 12 Ounce
  • Cure Time: 1 Hours
  • Recommended surface: Plastic Metal, Glass, Vinyl, Ceramic and Wood


1. Can You Repaint Plastic Little Tikes?

Answer: You can repaint plastic Little Tikes with oil-based paint. We recommend you to use Rust-Oleum PK Painter or Krylon Fusion Spray Paint for Plastic. They give you an excellent result. In addition, they produce an extremely durable finish for your plastic Little Tikes.

2. Can You Paint Car Rims?

Answer: Yes, you can paint rims. From experience, this is the second easiest way to change the appearance of your car drastically. Moreover, it’s inexpensive and easy to do yourself. Moreover, if you're doing rotas or meshies, all you really need are rims and tires.

3. What Colors Can You Paint Power wheels?

Answer: I'm sure you can paint it with any color that you want. You will find many colors for power wheels. Just determine which color you want. However, you should know that the most favorite colors are red and black.

4. What Kind of Paint do You Use on Plastic Toys?

Answer: It would be better to use paints that are mainly designed to stick to plastic toys. You may find many different paints available out on the market for painting your power wheels, for example, Rust-Oleum 316292-6 PK and Krylon Fusion for plastic spray paint.

5. How to Remove Paint from a Child's Power Wheel Car?

Answer: Removing paint from a child's power wheel car can not be hard but tricky. It is essential to choose the correct method to remove the paint. In addition, you should take care not to damage or scratch the toy during this process.

Soapy water, mineral spirits, and grit sandpaper all work well. Soapy water and grit sandpaper are the best. Please note that you do not want to rub too hard, or you could scratch or damage the toy.

In addition, it is essential to remove all traces of paint from the car before coating it with an anti-rust solution. In this way, your vehicle will last a long time and stay looking good as new.

6. Can You Find an Expert to Repaint Power Wheels?

Answer: Yes, you can find an expert to repaint your power wheels. Many professional painters offer a restoration service for a very competitive price. Just look around before restoring power wheels yourself. But the best option is to restore power wheels yourself. It's cheap and easy to do.

Final Words

Power wheels are those that let the kids enjoy the real adventure out there and have great fun. It will make sure that your child becomes safe while playing as well. But if you want to make your power wheels rust and dirt-free, then painting is a must.

I hope after reading this article you might get the right way on how to paint a power wheels car safely and accurately. Give your custom-painted power wheels an instant facelift and let your child enjoy the riding.